GAM 980 High Precision Hole Inspector machine for PC Board
  • Windows interface :Easy to learn.
  • Adjust the inspection speed based on needs.
  • Set up the inspection & non-inspection area.
  • Set up the hole diameter on needs.
  • Unique Image Processing Technology :High Inspection Reliability.
  • Can tolerate the ±30 degrees deviation of the standby plate.
  • Compare with PCB or CAM standard.
  • Fully auto focusing function.
  • Unique function can reduce the error percentage.
  • The base board can rotate 8 directions.
  • Finished board inspection.
  • Bare Copper Board Inspection after drilling.
  • Match the SPC statistic data sheet.
  • Can measure the flexible pc boards (available under 0.15mm)
  • Loader.
  • Led module.
  • Illumination meter.

【Inspection Items】

  • Inspect standard board hole quantity.
  • Inspect test board hole quantity.
  • Inspect defective hole quantity.
  • Inspect good hole quantity.
  • Inspect surplus hole quantity.
  • Inspect lack hole quantity.
  • Inspect of hole diameter.
  • Bits of solder/copper.
【Inspection Standard Setting】
  • Windows interface : Easy Operation.
  • Set up the tolerances of difference shape of hole.
【Display Drill's diameter position】
  • Display Drill's size and position.
  • Convenient to save data with complete file format.
【Analysis form of Drill's Diameter】
  • Display the analysis form of drill's diameter.
  • Index for improving processing and quality.
【Auto focusing function】
  • Enter the thickness value of PC boards and software will auto focus.
  • The software will auto detect the PC boards thickness and focus.
【Inspection parameters setting】
  • Circular hole, deficient hole and board side shaping inspections are selectable.
【Authority setting】
  • System opens distinct functions base on different password.
【Language & Unit setting】
  • Language and unit are selectable.
【Color Display】
  • Different hole shape be displayed by different color.
  • Flexible operation interface.
  • Could be inspection by special hole shape.
  • Could be inspection by part range.
  • Could be set to inspect one hole.
【Assistant image window】
  • Selection and hole on master window then clicks it after that the holes imagination will display to assist you identify defect condition.
【Data Report】
  • List the result of defective hole for user could control quality prompt.
  Item GAM980
  Inspection method CCD IMAGE SENSOR
  CCD dpi 1200 dpi
  Board Size 110*130mm(Min),600*600mm(Max)
  Board Thickness 0.1 ~ 7mm(0.2 needs the jig)
  Hole diameter ≧0.1mm(conveyer speed 2.5M/min)
  Max. quantity of inspection ≧400,000
  Inspect speed 2.5、5、7.5、10、12.5m/min
  Max. Slanting angle 30°
  Focusing function Auto Focusing
  Light source LED
  Accuracy ±15um
  Voltage AC 220V、Single50/60Hz、1.5KVA
  Dimension 3850(L)*1040(H)*1190(H) mm
  Weights  1490 Kg
  Air demand  7Kg
  System  Windows XP
Above View  
Front View
Lateral View
  Catalogue GAM980.pdf  
  Video GAM980.mpg  
  Manual GAM980.pdf