KP510A Vision Added Automatic Printer

  • Auto stencil cleaning: Standard Specification, including Wet wiping, dry wiping and Exhausting the air.
  • Humanity software: Easy to learn and operate.
  • When Blade is working under stencil or departing from stencil; it will not move up and down; to ensure the steady of printing.
  • Blade tooling with floating blade and device of constant pressure, it will not influence the quality when changing the blade.
  • Built-in multistage function for separated board could prevent the solder stain the boards.
  • Z axis print platform working fast and steady, could increase the printing flatness of increase the printing flatness of pc board.
  • The vacuum device is option,  for under 0.6mm board.
  • Alignment system with the multi binary control, and include the X,Y,θ high precision movement, ensure the printing fixed accuracy.

【Application】

  • Apply to SMT/Semiconductor Stencil/ Screen printing, also for the solder paste printing/ glue printing process.

  • Best solution for semiconductor printing process.

  • Repeat printing could achieve to ±10μm. (For 01005 component requirement.)

  • Low cost fully auto printer, outstanding & high performance printer in this fields.

  • Equipped best resolution CCD vision alignment system.
【Operational Vision】
  • Diagrammatic window operating page.
  • Human Operational Environment.
  • Easy to learn and operate.

【System Setting】

  • Provide alignment diagrammatic machine.
  • Windows Operational Is Easy to learn and operate.
【Printing Mechanism】
  • Floating blade and constant pressure system : Control the printing pressure accuracy on each position.
  • Built-in multistage function for separated board could prevent the solder stain the board.
  • Blade is working under stencil or departing from stencil; it will not move up and down; to ensure the steady printing.
【Clean device】
  • Auto stencil cleaning : Standard equipment, including Wet wiping 、Dry wiping and Exhausting the air.
  • To ensure the smooth and reliable operation, the auto. steel-wire clean system and CCD device are separated.
  • To ensure the printing and cleaning quality, all parameters can be set such as clean mode and clean cycle etc.
  • Extra function to strengthen the clean.
【Clean device】
  • CCD vision alignment module : multi binary control.
  • The vacuum device is option,  for under 0.6mm board.
  • Programmable and adjustable high-speed PCB transmission system.
  • On-axis light and ring lamp to be used, could check for different types of PCB board.
【Pressplate/backup plate】
  • Precise clamping system can effectively overcome the printing accuracy for curved PCB.
  • Suitable for most single-side/duplicated and multi-layer PCB board.
　
【Specifications】

Machine Information

　

KP510A
Approx dimension 1110mm*1390mm*1561mm
Approx weight Approx. 950Kg
Power supply AC 1Ø,220V,50/60HZ;2kw,10A
Air supply Clean dry air 5~6kg/cm2 30L/min
Operation interface Windows interface

Board Specification

　

KP510A
Suitable dimension of board max:400*310(mm) min:50*50(mm)
Suitable thickness of board 0.6~6(mm)
Board width adjustment Auto
Suitable weights of board 3kg or less
Board clamping tooling Edge clamp (Could adjust the softness)

Print Parameters

　

KP510A
Stencil frames max:735*735(mm) min:650*550(mm)
Print area max:400*310(mm) min:50*50(mm)
Print pressure 0~5kg/cm2
Stencil separation speed 0.1~5mm/sec (Programmable)
Print direction Front to back/Back to front
Print speed 5~250mm/sec

Vision System

　

KP510A
CCD camera High resolution CCD
Image process Multi binary control
Fiducials 2
Fiducial spec 0.1mm~3.0mm
Fiducial position Any point on PCB
Fiducial error recovery Auto fiducial search

Machine Capability

　

KP510A
Repeat Precision ±10μm
Printing precision ±20μm
Cycle Time <7.5sec
Clean function Wet wiping/Dry wiping/Exhaust the air
Clean dimension X:400mm

Option

Thimble/ejector bar

Vacuum holding fixture module
【Download】
　 　 　 　
　 Catalogue KP510A.pdf 　
　 Video KP510A.mpg 　
　 Manual KP510A.pdf 　

<Back >